HPE-110 User's Guide

"HPE-110" User's Guide

Software Installation

Windows 2000 Driver Installation

Talk on the Phone at the Same Time
Ultra-high frequency so that you can never hear it, and you can make, and take calls at the same time.

net.gif (5179 bytes)

Share Files

Use and copy files from and to any PC

Share Equipment

Printers, Scanners, Modems, CD ROMs, ZIP Drives like they were on your PC.

Share Internet

Whether your connection is Cable, Analogue, XDSL, all your PCs will be simultanously connected.

Network Games

Network games from multiple PCs inside your home or even with those on the Internet for full-on multi-player games.

General Features
Standard		HomePNA Specification 1.0/2.0
Data Transfer Rate		HomePNA 10 Mbps

Use the existing phone wiring POTS (Plain Old Telephone Service) that bring the user easy to use		Yes
Optimized for home networking application over ordinary copper telephone wire		Yes
Network Media		Dual RJ-11 Phone Jack for PSTN line
Application
Internet Sharing	Yes
Printer Sharing	Yes
Share Files and Devices	Yes
Play Networked Games	Yes
Environment
Operating Systems		Windows 95/98/ME/2000,NT4

Software Installation

1. Turn on the computer. As Windows 98 starts up,

it informs you that it has found new hardware "PCI Ethernet Controller" and starts the Update Device Driver Wizard.

Click "Next".

2. Insert the driver installation diskette or CD disc before continuing with the Update Device Driver Wizard.

3. Windows found the " HPE-110 10Mbps HomeLAN PCI Adapter ", click "Next".

4. Click "Finish".

5. Click "YES" to restart your computer.

1. Power on your PC. Select Start è Settings è Control Panel. Then Click “Network”

2. Click “Add”, you will get the window. Click “Have Disk”. Insert the driver installation CD disc.

Select driver directory.

3. Select "HPE-110 10Mbps HomeLAN PCI Adapter Driver", click "OK".

4. Install completed.

5. Click "YES" to restart your computer.

1. Turn on the computer. As Windows 2000 starts up,

it informs you that it has found new hardware "Ethernet Controller" and starts the Update Device Driver Wizard.

Click "Next".

2. Insert the driver installation CD disc before continuing with the Update Device Driver Wizard.

3. Windows found a driver for HPE-110 , click "Next".

4. Install completed , Click "Finish".

5. Click "YES" to restart your computer.